GATEWAY FOR ANALOG RADIOS
A small stand-alone device: power it on, connect Wi-Fi and a radio. Everything said into that radio, and on the channel around it, is heard in the Privox app, and words spoken in the app come out of the radios. No separate computer is needed.
THE PROBLEM
A site often already has analog radios, and replacing them makes no sense. But people with radios and people with phones cannot hear each other. The gateway puts them in one channel.
Everyone in the Privox group hears it: phones, web and the dispatcher. The speaker is identified by name on air.
Everyone with a radio on that frequency, within radio range of the gateway, hears it.
The gateway connects to the internet and to Privox by itself, updates over the air and is set up from a phone.
HOW IT WORKS
A cable goes into the radio's headset jack. The gateway hears everything the radio receives and can key the radio to transmit.
GALVANIC ISOLATION: RADIO AND BOARD ARE NOT ELECTRICALLY CONNECTED
It connects to your Privox server under its own key, as one more member of the group.
ONE GATEWAY, ONE GROUP, ITS OWN KEY
Radios send a short code (DTMF) at the start of a transmission. The gateway recognizes it, removes it from the audio and shows the person's name on air. An unknown code goes to a list for the administrator to assign.
A NAME ON AIR, NOT “UNKNOWN RADIO”
By default the gateway only listens. An administrator switches on transmission from Privox into the radios; a dispatcher can switch it off with one tap.
THE SYSTEM OWNER IS RESPONSIBLE FOR TRANSMISSION
WHAT YOU NEED
| Item | Details |
|---|---|
| Gateway and radio cable | The box with the label on the bottom; a cable with two plugs (3.5 and 2.5 mm) for a Kenwood-type headset jack |
| A radio | With a headset jack and an antenna (for example Quansheng UV-K5) |
| Power | A 5 V adapter (a phone charger works) and a USB-A to USB-C cable |
| Network | 2.4 GHz Wi-Fi with internet access |
| Access | An administrator account in Privox and a phone for setup |
SETUP
A step-by-step guide with examples is in the PDF (button at the bottom). In short, four parts:
Create a “user” for the gateway (role USER), add it to the right group, then in Gateways press CREATE. The admin shows a setup code and a QR code once: it already holds everything needed (server, gateway ID, key, group). Copy it right away.
5 MINUTES, ON A COMPUTER
Power it on, hold BOOT for 3 seconds until the LED blinks blue, join the Privox-GW-Setup network on a phone (password on the label), and on the page that opens pick your Wi-Fi and set the gateway page password.
5 MINUTES, ON A PHONE
Open the gateway page (address on the label, for example privox-gw.local), paste the setup code under Privox connection and press Apply code. Within 10–20 seconds the gateway shows as online in the admin.
2 MINUTES
Radio power on LOW, antenna fitted, cable in the headset jack. Speak from another radio and hear it in Privox; switch transmission on in the admin and speak from a phone: hear it on the radio.
10 MINUTES
LED AND BUTTON
| LED | Meaning |
|---|---|
| Red | The gateway is transmitting to the radio |
| Green | The gateway is receiving from the radio |
| Dim blue | All good, waiting |
| Blinking blue | Setup mode (10 minutes) |
| BOOT button | Action |
|---|---|
| Hold 3 seconds | Open setup mode |
| Hold 10 seconds | Reset Wi-Fi and page password, start setup again |
IF SOMETHING IS WRONG
| What happened | What to do |
|---|---|
| The gateway page will not open | The phone must be on the same Wi-Fi network. Or open the gateway's address from your router's device list. |
| The gateway does not show as online | Check the internet in that network and enter the code again. If in doubt, press NEW KEY in the admin and paste the new code. |
| Forgot the page password | Hold BOOT for 10 seconds and set the gateway up again. |
| Quiet or distorted sound | Adjust the radio volume and the receive gain on the gateway page. |
| Moving the gateway elsewhere | Unplug and move it. The Privox link is kept; repeat step 2 on the new Wi-Fi. |
SPECIFICATIONS
| Parameter | Value |
|---|---|
| Power | 5 V, USB-C connector (via a USB-A to USB-C cable); about 0.8 W (150 mA) |
| Network | 2.4 GHz Wi-Fi; the gateway connects outward to Privox, no router ports to open |
| Radio connection | Headset jack, audio through transformer isolation, transmit key on a separate optocoupled channel |
| Control | Gateway page from a phone; firmware updates over the air |
| Enclosure | Plastic, 106 × 78 × 29 mm, short instructions label on the bottom |
CONTACT
The gateway is a topic for a conversation, not an off-the-shelf product: we will tell you what suits your site and your radios, and show it in action. A detailed guide with examples is in the PDF.
Download the guide (PDF)